Extron electronics TLI Pro 101, User Manual

Page: 21 / 41

Network
Press the
Network
button in the navigation panel at the top of the screen to open the
Network
screen.
Network Status Output Audio Input Advanced Exit
DHCP
On Off
192.168.254.253
192.168.254.254
255.255.0.0
0.0.0.0
XYZ-123-AB-CD-EF Host Name:
IP Address:
Subnet Mask:
Gateway:
DNS Primary:
Mac Address:
Domain Name:
xx-xx-xx-xx-xx-xx
abcdefghijklmnop...
Apply Revert
Figure 8. Network Screen
1. If IP addresses are assigned by DHCP, press
On
. If the IP address is to be assigned
manually, press Off .
•
When DHCP is off, the Host Name is grayed out and cannot be edited. All addresses
can be edited.
•
When DHCP is on, the Host Name can be edited. The addresses are grayed out and
cannot be edited because they are set by the DHCP server.
2. If DHCP is on, press the
Host Name
button to edit the host name. The
Host Name
dialog
box opens:
Figure 9.
Host Name Dialog Box
Use the keypad to enter a new name, which appears in the Host Name text box.
TLI Pro 101 • On-screen Menus 14