![Extron electronics SMD 101 User Manual Download Page 63](http://html1.mh-extra.com/html/extron-electronics/smd-101/smd-101_user-manual_2456436063.webp)
On Screen Display
The
On Screen Display
(OSD) (see figure 54) provides information superimposed on
the output video and providing information useful for troubleshooting and for checking the
elapsed duration of play and related statistics for the selected file or stream.
Extron Electronics
SMD 101 Stream Media Decoder
192.168.254.254
FW: 1.20
SOURCE RATE
704x576 @ 25 AAC-LC
OUTPUT RATE
1080p @ 60
VIDEO STREAM 0
encoding: h264 video
width: 704
height: 576
framerate: 25
interlaced: false
AUDIO STREAM 0
encoding: mpeg4_aac_audio
profile: Ic
channels: 2
rate: 44100
signed: true
STATUS INFORMATION
Network Condition: Very Good
Audio Bitrate: 124 Kbps
Video Bitrate: 3618 Kbps
DEVICE INFORMATION
CPU: 21%
Mem: 37% used
Temp: 58.5C
Date: 12/01/2013 15:10
Figure 54.
Configuration Page - On-Screen Display Status Information Panel
Status Information
The Status Information OSD displays the following types of information:
•
Information about the SMD 101
•
The SMD 101 model name and description
•
The IP address of the unit
•
The current firmware version
•
Some of the information from the
Troubleshooting
embedded web page
including the percentage of CPU usage, percent of memory usage, internal
temperature of the unit, and the current date and time
•
Video stream data including encoding type, the image width and height in pixels, frame
rate, and whether or not the signal is interlaced.
•
Audio stream data including encoding type, audio format, number of channels, rate,
and whether the stream is signed.
•
Network and stream status, including network condition and audio and video bit rates.
•
The source rate (resolution, refresh rate, and audio format).
•
The output rate (resolution, refresh rate).
The controls within the
On Screen Display
(OSD) page (see figure 55) enable and disable
one or both types of on-screen display. You can also set the position and display duration
of each. When enabled, these displays are superimposed on the output video and provide
information useful for troubleshooting and for checking the elapsed duration of play and
related statistics for the selected file or stream.
All users, whether logged in as an administrator or a user, can adjust these settings.
SMD 101 • Web-based User Interface
56
Summary of Contents for SMD 101
Page 2: ......