ShareLink 200 N • Using the Embedded Web Pages
27
Network Setup
1
1
1
2
2
2
3
3
3
Figure 21.
Network Setup
1
Host Name and Domain Name panel
•
Host Name
— Enter a hostname for the ShareLink or leave the default name as is.
•
Domain Name
— Enter the domain name for the DNS server.
2
IP Setup panel
•
Obtain an IP address automatically
(default setting) — Select this
option to obtain an IP address automatically from a DHCP server. The default
settings are:
IP Address
: 192.168.254.254
Subnet Mask
: 255.255.255.0
Default Gateway
: 192.168.254.254
DNS Server
: 0.0.0.0
•
Use the following IP address
— Select this option to enter a static IP address.
IP Address
— Enter an IP address.
Subnet Mask
— Enter the corresponding subnet mask.
Default Gateway
— Enter the corresponding gateway address.
DNS Server
— Enter the corresponding DNS server address.
3
DHCP Server Setup panel
•
Auto
(default setting) — If a DHCP server is available on the network, the ShareLink
uses an IP address assigned by the server. If a DHCP server is not available on the
network, the ShareLink uses its internal DHCP server to assign IP addresses to
network devices. The default settings are as follows:
Start IP
: 192.168.254.11
End IP
: 192.168.254.100
Subnet Mask
: 255.255.255.0
Default Gateway
: 192.168.254.254
DNS Server
: 0.0.0.0
NOTE:
In Auto mode, you may use the default settings above or customize the
settings, if needed.
•
Disable
— Select this option to disable the internal DHCP server.
PRELIMINARY
Summary of Contents for ShareLink 200 N
Page 6: ...PRELIMINARY ...