7
Attaching Power and Audio Sources to the SB 33 A
The SB 33 A has a power supply for the amplifier housed in the left speaker enclosure. The power supply has an AC power input
connector (
A
) and a DC power output connector (
B
) that routes power to the amplifier. See the illustration below.
Left Speaker/Power Supply
(Side View)
A
A
B
B
This section describes how the power and audio sources are attached to the SB 33 A, as shown in the following steps.
NOTE:
Speaker and DC power cables must be routed before attaching the center bracket to the wallplate. See the previous
section.
e
e
Amplifier Module (inside Right Speaker module)
Power Cord
Front View
DC Power Cable
Power Supply
Left Speaker Module Wires
Audio Input Cable
1
Figure 1.
Speaker and DC power cable routing
1.
Wiring access points for the power and speaker cables to the SB 33 A are shown below.
Top Cable Access Points
Bottom Cable Access Point
Back Cable Access Points
Wallplate
Access Points
