Extron electronics RWM 1, Installation Manual, Page: 1 / 2

RWM 1 • Installation Guide
Overview
The RWM 1 is an accessory kit for the TLP Pro 525M touchpanel
to be installed into a wall. This guide provides instructions for
experienced and professional installers to mount and install the TLP
Pro 525M using an RWM 1.
ATTENTION:
•
All structural steps and electrical installation must be performed by qualified personnel in accordance with local
and national building codes and electrical codes.
•
Toute étape structurelle et installation électrique, doit être effectuée par un personnel qualifié, conformément aux
codes du bâtiment, aux codes incendie et sécurité, et aux codes électriques, locaux et nationaux.
Figure 1. RWM 1
1
A
Screws to turn locking arm (4)
C
2-gang EU junction box mounting
holes
E
1-gang North America
junction box mounting holes,
horizontally mounted
B
Magnets (4)
D
1-gang MK junction box mounting
holes
F
Locking arms (4)
The RWM 1 ships with three magnets attached to the front and a spare magnet ( G ) attached to the back, as shown in
figure 1. The spare magnet can be moved to the front if extra support is needed.
TOP
NORTH
AMERICA
EU
MK
EU
NORTH
AMERICA
EU
MK
EU
Front View Back View
F F
B B
C C
D D
E E
A A
G G
IMPOR
TANT
:
Go to
www
.extron.com
for th
e
complete user guide and installation
instructions befor
e connecting the
product to the power sou
rce.
www
.extron.com
e
RWM 1
TLP Pro 525M
Mounted Touchpanel