•
Adjustments
— With a desired submenu option displayed, rotate the horizontal (
[
)
and vertical (
{
)
Adjust
knobs clockwise or counterclockwise to display and select the
parameters available for the option.
NOTE:
The Adjust knobs may also be used to adjust settings for the board devices
that are installed in the enclosure slots. As examples, the
[
knob may select
the desired input or output, and the
{
knob may select values.
•
Implementation
— To save and implement the adjustments you have selected, do one
of the following:
•
Press
Next
to display another submenu option to adjust.
•
Press
Menu
repeatedly until the
Exit
menu screen appears, then press
Next
.
•
Do nothing more, and wait until the LCD screen returns to the default cycle.
Your adjustments remain in effect until you change them or reset the unit to factory defaults
(see
Resetting the PowerCage 401 Enclosure with the Reset Button
NOTE:
The menus time out and the default cycle displays after 30 seconds of inactivity.
However, any selections you made with the
Adjust
knobs are saved and remain in
effect.
Main Menu
The Main menu advances through
four menus by pressing the
Menu
button, as shown below.
•
Slot menu
•
Frame Status menu
•
View Comm Settings menu
•
Exit menu
Power
On
60-1492-01
FW v1.00.xxxx
Default
Cycle
SLOT MENU
Menu
Menu
Next
Menu
Menu
Menu
2 sec.
5 sec.
30 sec.
FRAME STATUS
MENU
VIEW COMM
SETTINGS MENU
EXIT MENU
EXTRON
POWERCAGE401
Figure 11.
Main Menu Flowchart
11
PowerCage 401 Enclosure • Operation
17
