Extron electronics NAV SD 511, User Manual

Page: 69 / 90

NAV SD 511 Scaling Decoder • HTML Operation 61
Ports page
The
Ports
selection on the
Networking Settings
page (see figure 59 on page 58) opens
a read-only pane that shows the port usage parameters of the decoder (see figure 62).
The
HTTPS
and
RTP Start
parameters can be edited by clicking the EDIT button (
1
). This
feature gives the flexibility to use specific ports of your choosing, if the default ports are in
use. An editable version of the selection opens (see figure 63).
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 62. Ports Selection
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Figure 63. Editable Ports Selection
1
HTTPS and RTP Start — Click in these fields and type in valid values for your decoder.
NOTES:
• Valid HTTPS values:
•
0 = Disabled
•
443
= Default
•
1024
-
65535
= Usable range
• Valid RTP Start values:
•
0
= Disabled
•
1024 - 65529 = Usable range
• See the NAV Series Pro AV Ports and Licenses Guide , available at
www.extron.com , for more information on ports.
2
SAVE and CANCEL buttons — Click SAVE to take
Port
changes or CANCEL to
abandon them. Clicking either button closes the editable selection.