6
68-3442-50 Rev. B
10 20
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
on the Extron website.
©
2019-2020 Extron — All rights reserved.
All trademarks mentioned are the property of their respective owners.
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
4.
Use a Tweeker or other small screwdriver to press and release the
encoder
front panel
ID
button. The encoder exits pairing mode.
5.
Repeat steps 1 through 4 to pair decoders to other encoders.
After all devices are connected, powered on, and paired, the system is fully operational.
Operation in a System with a NAVigator
The Extron NAVigator is a system manager that easily configures and controls the NAV System. The NAVigator supports 16 endpoints by
default, but a LinkLicense can upgrade its capabilities to support up to 240 endpoints.
See the
NAVigator User Guide
for details.
Connection Details
LockIt
®
Lacing Brackets
1.
Plug the HDMI or USB cable into the panel connection (see
1
, at right for an HDMI example).
3
3
3
3
1
1
1
5
5
5
4
4
4
2
2
2
2.
Loosen the connection mounting screw from the panel enough to allow the LockIt lacing bracket to
be placed over it (
2
). The screw does not have to be removed.
3.
Place the LockIt lacing bracket on the screw and against the connector (
3
), then tighten the screw
to secure the bracket.
ATTENTION:
•
Do not overtighten the connector mounting screw. The shield it fastens to is very thin
and can easily be stripped.
•
Ne serrez pas trop la vis de montage du connecteur. Le blindage auquel elle est
attachée est très fin et peut facilement être dénudé.
4.
Loosely place the included tie wrap around the connector and the LockIt lacing bracket as shown (
4
).
5.
While holding the connector securely against the lacing bracket, use pliers to tighten the tie wrap, then remove any excess length (
5
).
Analog audio input
EXT connector
Unbalanced Stereo Input
Balanced Stereo Input
Do not tin the wires!
Tip
Ring
Tip
Ring
LR
Sleeves
Tip
Sleeve
Sleeve
Tip
LR
5
Pin
1
2
3
6
7
8
4
Wire color
White-green
Green
White-orange
White-blue
Orange
White-brown
Brown
Blue
TIA/EIA T568B
TP Wires
12345678
Pins:
Control connector
Power connector
Tx
Rx
Rx
Tx
Gnd
IR Device
Tally out
Contact
Show Me Cable
RS-232
Device
RS-232
Tx
Rx
GS
G
IR
CONT
CT
CONTROL
Power Supply
Output Cord
Ridges
Smooth
Captive
Screw
Connector
3"
16 (5 mm) MAX
SECTION A–A
A
A
