manualshive.com logo in svg

Extron electronics MLS 608 D SA, User Manual

Share
Download
Extron electronics MLS 608 D SA User Manual Download Page 66

The HDCP Status section of the workspace is enabled while in Live mode and displays the 

following details:

 

z

If an HDCP-compliant source is detected on the inputs, the indicator for the associated 

inputs are shaded light green.

 

z

If the active source is HDCP-compliant and the connected display is non-HDCP 

compliant, the output indicator is shaded dark green. If the connected display, is not 

HDCP compliant, the MLS 608 D Series device mutes the output.

 

z

If the HDCP status is unknown, the associated indicator is not shaded.

Figure 41. 

HDCP Status Display

Video Signal Presence

The Audio & Video I/O workspace and the Video I/O workspace show a Video Signal 

Presence indicator section. This section of the workspace is enabled while in Live mode 
and displays the following details:

 

z

If a video signal is present on one of the eight inputs, the associated indicator is 
shaded light green.

 

z

If no video signal is present, the associated indicator is shaded dark green.

Figure 42. 

Video Signal Status Display

 

 

MLS 608 D Series • DSP Configurator

60

Summary of Contents for MLS 608 D SA





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands