4.
Loosely place the included tie wrap around the
HDMI connector and LockIt lacing bracket.
5.
While holding the connector securely against the lacing bracket, tighten the tie
wrap, then remove any excess length.
The LockIt bracket can be mounted in different orientations, as shown below.
Top Mounted
3
Side Mounted
Stacked
h
Digital video and RS-232 outputs —
These two RJ-45 connectors output digital
video signals and RS-232 commands to the MTP/HDMI U R receiver over Extron
STP 201 (recommended), CAT 5, 5e or CAT 6 cable.
The RS-232 signal is bi-directional and its source is tied to the 5-pole, captive screw,
RS-232 Insert port. See the pinout table below.
path.
Pin
T568A Wire Color
T568B Wire Color
RJ-45 #1
RJ-45 #2
1
White-green
White -orange
Data 0 +
CEC
2
Green
Orange
Data 0 -
HPD
3
White-orange
White-green
ID Clock +
(RS-232 Insert)
4
Blue
Blue
Data 1 +
DDC Clock
5
White-blue
White-blue
Data 1 -
N/A
6
Orange
Green
ID Clock -
(RS-232 Insert)
7
White-brown
White-brown
Data 2 +
DDC Data
8
Brown
Brown
Data 2 -
Ground
NOTE:
Terminate both ends of the same cable identically, in accordance with
either the TIA/EIA T568A or TIA/EIA T568B wiring standard.
Plug terminated cable from the MTP HDMI U R in to these two RJ-45 connectors for
digital video and RS-232 output.
Using STP201 cable is recommended.
The digital signal transmission distance is shown below
.
MLS 608 D
AUX
VID
PC
DOC
CAM
Blu-ray
VOLUME
SOURCE SELECTION
CONFIG
R
MIC VOLUME
AV Switcher
LAPTOP
1
2
3
4
5
6
7
8
MLS 608 D
MTP/HDMI U R
MTP/HDMI U R
RGB
PEAKING
LEVEL
DIGITAL SIGNAL
ANALOG
SIGNAL
AUDIO
RS-232
VID
Y/C
YUV
RGB
CAT 5/5e/6 Cable
Extron STP201
UTP
STP
Cable
200' (60 m)
200' (60 m)
200' (60 m)
100' (30 m)
125' (38 m)
150' (46 m)
Resolutions
MLS 608 D to MTP/HDMI U R
Digital Signal Maximum Transmission Distances
1024x768,
720p, 1080i @ 60 Hz
1600x1200, 1920x1200,
1080p @ 60 Hz
8-bit Color Depth
MLS 608 D Series • Rear Panel Connections
12
