Installation, cont’d
MLM-WB • Installation
2-12
#632 Nut
with Washer
(3 places)
Horizontal
VCR Access
Plate
Vertical
VCR Access Plate
VCR Access Plates
(top, front view
from the
inside of the MLM-WB)
Loosely attach the
vertical VCR access
plate’s long or short
face (depending on
VCR size) to the side of
the MLM-WB.
Installed VCR Access Plates
(as viewed
from the inside
of the MLM-WB)
3.
Install the adjustable plates on the side that will be used for VCR access, if
that has not already been done.
Do not tighten the nuts yet.
The vertical VCR access plate has an L-shaped cross section. Depending on
the size of the VCR (i.e., how much depth adjustment is required), attach either
the long or the short face of the vertical plate to the MLM-WB enclosure.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203