manualshive.com logo in svg

Extron electronics MLC 104 IP Plus Series, User Manual, Page: 62 / 174

Share
Download
Extron electronics MLC 104 IP Plus Series User Manual Download Page 62

MLC 104 IP Plus Series • Software-based Configuration and Control

54

Statistics

The 

Statistics

 page is mainly for administrators and maintenance personnel. It shows 

information about system usage: the number of hours the system has been turned on, 
how many hours the projector lamp has been used, how much time per day and per week 
the system is turned on, and how many times each button on the MLC has been pressed, 
either physically or virtually (via configuration software, SIS commands, or event scripts). 
All of the button press and system use statistics (with the exception of lamp hours) can be 
reset to 

0

 by clicking the 

Reset Statistics

 button at the bottom of this screen.

NOTE:

  This page is not available unless the MLC has been configured with Global 

Configurator version 2.x or higher.

Figure 19. 

A Statistics Embedded Web Page

Summary of Contents for MLC 104 IP Plus Series















































































































































































Reviews:

No comments