Extron electronics MLC 104 IP Plus Series, User Manual, Page: 130 / 174

MLC 104 IP Plus Series • Special Applications 122
14. Create the e-mail file that the input 3 button sends (see image below right).
a. Click near the
bottom of the Monitored
Conditions Wizard
window. The Email
Manager window opens.
b. Type in the e-mail name
(this appears in the list of
available e-mails in GC),
the subject (which appears
as the set e-mail’s subject
line), and the body (the
contents of the e-mail).
c. Click Add .
d. Click Done . The Email
Manager window closes.
15. Click to select one e-mail (the one
you just created) in the
Email
Messages
list, as shown at right.
16. Click to select one or more e-mail
recipients in the
Contacts list.
17. Click Apply
Email/Contacts
.
The e-mail and the recipient
name(s) appear in the
Monitored
Conditions
area, as shown in the
following screen excerpt.
18. Click the Done button at the bottom of the Monitored Conditions Window ,
which then closes.
19. Complete the rest of the configuration as desired.
20. Save the project.
21. Build and upload the configuration to the MLC.
Working With a Non-MediaLink Extron Switcher
Although the MLS port on the MediaLink Controller can be used as an auxiliary RS-232
port for controlling another type of device, it is usually used to connect an Extron MediaLink
Switcher (MLS) or PoleVault Switcher (PVS). The MLC recognizes and communicates with
MLS and PVS switchers without requiring additional drivers or configuration, unless you
want to remap switcher inputs to the buttons on the MLC.