MGP Pro Series • Operation
30
4.
When finished editing the settings for the selected item, either press
NEXT
to display
the editing screen for the next item, or press
MENU
to exit serial and IP edit mode and
display the next menu (
Advanced
Configuration
).
The following screens are provided for editing parameters:
•
Serial
Config:
Configure the serial port by switching between RS-232 and RS-422,
and selecting the baud rate.
•
Set
DHCP
Mode:
Set DHCP to On or Off.
NOTE:
DHCP must be off before you can edit the IP addresses.
•
Set
IP
Address:
Set the IP address.
•
Set
Gateway
Addr:
Set the gateway address.
•
Set
Subnet
Mask:
Set the subnet mask.
NOTE:
The MAC address has no screen in this mode because it cannot be edited.
Advanced Configuration Menu
Use the
ADVANCED CONFIGURATION
menu to set the background color, turn blue mode on
and off, and select test patterns. You can also view the internal temperature of the MGP Pro
and reset the system to its factory default settings.
Figure 20.
Advanced Configuration Menu Flow
20
