MediaPort 200 • Remote Configuration and Control
130
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
Input Aspect Ratio
Enable fill mode
E
1*1ASPR
}
Aspr1*1
]
Set the input to always
fill the entire output raster
(default).
Enable follow mode
E
1*2ASPR
}
Aspr1*2
]
Set the input to preserve
its native aspect.
View aspect ratio
setting
E
1ASPR
}
X3(]
With tagged responses
(verbose modes 2 and 3):
Aspr1*
X3(]
View input aspect ratio
X3(
.
Overscan Mode
NOTE:
Overscan only applies to SMPTE input rates 480i, 576i, 480p, 576p, 720p, 1080i, and 1080p.
Set value
E
1*
X3*
OSCN
}
Oscn1*
X3*]
Set the HDMI input to
overscan mode
X3*
.
View status
E
1OSCN
}
X3*]
With tagged responses
(verbose modes 2 and 3):
Oscn1*
X3*]
Show overscan mode
status
X3*
for the HDMI
input.
Front Panel Lock (Executive Mode)
Enable lock mode
1X
Exe1
]
Lock the entire front panel.
Disable lock mode
0X
Exe0
]
Unlock front panel controls.
All front panel changes can
be made.
View lock mode status
X
X2(]
With tagged responses
(verbose modes 2 and 3):
Exe
X2(]
View current lock mode
status
X2(
.
NOTES:
X2(
= Front panel lock (executive mode) status:
0
= Unlocked (default),
1
= Locked (front panel
completely locked)
X3*
= Overscan — MediaPort 200
(Only for SMPTE input rates (480i, 576i, 480p, 576p, 720p, 1080i, and 1080p)
0
= 0.0% — A true Auto-Image is executed on SMPTE inputs (default for HDMI and DVI).
1
= 2.5% — Auto-Image commands snap to a 2.5% table. No true Auto-Image is
performed.
2
= 5.0% — Auto-Image commands snap to a 5.0% table. No true Auto-Image is
performed.
X3(
= Aspect ratio
1
= Fill — Each input rate automatically fills the entire output raster (default).
2
= Follow — Each input rate is displayed with its native aspect ratio.
