Extron electronics ISM 824, User Manual

Page: 139 / 166

6-9
ISM 824 Integration Scaling Multiswitcher • HTML Operation
For the e-mail settings and for each row of the e-mail notification settings, click Edit
to make the fields available for editing (see figure 6-7). The button changes to Save.
After editing the settings associated with the Edit/Save button, click
Save
.
Figure 6-7 — Email Alerts page
Setting up e-mail alerts
Set the ISM to send e-mail alerts when settings are changed as follows:
1 . On the Email Alerts screen, click
Edit
located to the right of the Mail IP
Address and Domain Name fields. The button changes to Save.
2 . If your domain user name has a password assigned, enter it.
3 . Click Save .
To set up e-mail addresses for notification, do the following for each recipient of
e-mail alerts:
1 . Click
Edit
. The Edit button changes to Save.
2 . Enter the e-mail address of the recipient, and the file name on the host PC
(*.eml extension) that contains the message.
3 . Click Save to save the changes. The Save button changes back to Edit.
Setting up SMTP authorization
To set the ISM 824 to require SMTP authorization before accepting any e-mail, do
the following:
1 . Click Edit . The button changes to Save.
2 . Check the SMTP Authorization Required check box, located below the
Domain Name field. This enables the User Name and Password fields below
the check box.