Figure 13.
Internet Protocol (TCP/IP) Selected on Local Area Connection
Properties Window
4.
Write down the current IP address and subnet mask of your computer below. You will
need to restore these settings to the computer later.
If the
Obtain
an
IP
address
automatically
radio button has been selected, make a
note of that.
5.
On the Internet Protocol (TCP/IP) Properties window, change your computer IP address
temporarily so that it can communicate with the PC1:
a.
Select the “
Use
the
following
IP
address
” radio button.
b.
Enter the following values as shown below:
IP address:
192.168.254.253
Subnet mask:
255.255.0.0
Default gateway:
Blank
or
0.0.0.0
(The temporary IP address differs from the PC1 factory default by 1 digit.)
Figure 14.
Internet Protocol (TCP/IP) Properties Window for Windows XP
c.
Click
OK
to save the changes and exit the network setup.
d.
Reboot the computer if required for the changes to become effective.
13
14
IPL T PC1 • HTML Configuration and Control
19
Summary of Contents for IP Link IPL T PC1
Page 6: ......
Page 8: ...IPL T PC1 Contents viii ...