Extron electronics Hideaway HSA 400 US/domestic, User Manual, Page: 22 / 28

HSA 400/402 Series • Reference Information HSA 400/402 Series • Reference Information
Reference Information, cont’d
Top Plate Dimensions
The preferred and recommended method for cutting the table is
to use the correct size metal routing template (figure A-3 and
chapter 2, “Installation”
)
and a router. See the part numbers for
the templates on page A-5.
USER ACCESS
EXTRON ELECTRONICS
USER ACCESS
Figure A-3 — HSA metal routing template
If you choose not to use the metal routing template available
from Extron, the cut-out templates (figure A-4, figure A-5,
figure A-6, and figure A-7) on the following pages will help you
properly prepare the mounting surface. The cutout templates
are
not to scale
and are
for reference only
. The surface cut-out
area dimensions on all templates are
C
and
D
and
marked in
bold type
.
For full size paper templates, visit the Extron Web site
( www.extron.com ) or call the Extron S
3
Sales & Technical
Support Hotline.
A-6 A-7
4.475" (11.37 cm)
6.425" (16.32 cm)
C = 8.113 0.0325"
(20.61 0.083 cm)
D = 5.925 0.0325"
(15.05 0.083 cm)
8.613"
(21.88 cm)
Cut surface material
out along this line. Cut-Out Radius:
0.25" (0.6 cm)
Tilting Plate Top Panel
Cut-Out Template for Extron's HSA 400
TEMPLATE IS NOT FULL SIZE.
SURFACE CUT-OUT
AREA = 8.113 0.0325"
(20.61 0.083 cm) x
5.925 0.0325"
(15.05 0.083 cm)
User Access (Connectors and AAP Openings)
US Model
6.663"
(16.92 cm)
+
+
+
+
+
+
+
+
G
H
Figure A-4 — HSA 400 US/domestic cut-out template