FOX3 SR 201 Scaling Receiver • Internal Web Page
45
5.
When finished, click
SAVE
to
set the passwords. To close
the window without saving a
password, click
CANCEL
or the
X
in
the upper-right corner.
NOTE:
Passwords can be changed
but they cannot be removed
entirely. The FOX3 must have
passwords at all times. These
fields cannot be blank.
Figure 40.
Passwords Dialog Box
LinkLicense Panel
The
LinkLicense
panel (see
on page 41) displays information about any
LinkLicense applied to the FOX3 device (A LinkLicense can be uploaded using the Extron
Toolbelt software. See
Software/Firmware Installation
on page 31 to download the
software).
NOTE:
A user must have an Insider Account to download and use ToolBelt Software.
Contact an Extron support representative, to obtain an Insider Account.
Figure 41.
LinkLicense Panel
40
41
Summary of Contents for FOX3 SR 20
Page 2: ...Safety Instructions...
Page 6: ......
