Extron electronics FOX3 Matrix 160x, User Manual

Page: 32 / 61

FOX3 Matrix Series Switchers • SIS Configuration and Control 24
Command and Response Table for SIS Commands
Command
Function
SIS Command
(Host to Device)
Response
(Device to Host)
Additional Description
NOTE:
Commands can be entered back-to-back in a string, with no spaces. For example:
1*1!002*002!003*003!
.
Output switching
NOTES:
•
The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
•
The matrix switchers support 3-digit numeric (
001*001
) and 5- digit for Audio ties (
50001*50001
).
•
The
! tie
command connects all available signals for the Tx to the Rx.
•
When you create a tie where
X!
=
00
, you tie no input to the specified output (
X#
) (untie
X#
).
•
When you create a tie where
X#
=
00
, you untie all outputs from input
X!
.
•
If a System Map has been initiated, the Input number (
X!
) or Output number (
X#
) can represent a single physical SFP port or a group of SFP
ports.
Tie input
X!
to output
X# X!
*
X#
! Out
X#
•
In
X!
•
All
]
Tie input
X!
to output
X#
, all signals.
Tie input
X!
to output
X# X!
*
X#
% Out
X#
•
In
X!
•
Vid
]
Tie input
X!
to output
X#
, video only.
Tie input
X3%
to output
X3^ X3%
*
X3^
$ Out
X3^
•
In
X3%
•
Aud
]
Tie input
X!
to output
X#
, audio.
Tie return audio source
X3&
to destination
X3*
X3&
*
X3*
& Out
X3*
•
In
X3&
•
Rta
]
Tie return audio source to destination.
TIP:
0*!
clears all ties.
KEY:
X!
= Input number
00
– Maximum number of inputs for your configuration (
0
= untie)
X#
= Output number
00
– Maximum number of outputs for your configuration (
0
= untie)
X3%
= Audio input number
00
– Maximum number of inputs or DMP Expansion
30001
-
30008
,
Dante
40001
-
40032
, Analog
50001
-
50004
X3^
= Audio output number
00
– Maximum number of outputs or DMP Expansion
30001
-
30008
,
Dante
40001
-
40032
, Analog
50001
-
50004
X3&
= Return audio source number
00
– Maximum number of outputs (from a Rx unit, DMP Expansion
30001
-
30008
,
Dante
40001
-
40032
, Analog
50001
-
50004
X3*
= Analog audio destination number (to Tx)
00
– Maximum number of inputs
Tie an input to all outputs
Tie input to all outputs
X!
*! In
X!
•
All
]
Tie video and audio input, 3D sync and
IR signals to all outputs.
NOTE:
USB 2.0, USB HID, and Return Audio are not switched with this command.
Tie input to all outputs X!
*% In
X!
•
Vid
] Tie video input to all outputs.
Tie input to all outputs
X!
*$ In
X!
•
Aud
]
Tie audio input to all outputs.
KEY:
X!
= Input number
00
– Maximum number of inputs for your configuration (
0
= untie)
Untie
Untie all outputs 0*!
In00
•
All
]
Untie all outputs.
Untie an output
0*
X#
! Out
X#
•
In00
•
All
]
Untie a particulaer output.
Untie an input
X!
*0! Out00
•
In
X!
•
All
]
Untie an input from all tied outputs.
KEY:
X!
= Input number
00
– Maximum number of inputs for your configuration (
0
= untie)
X#
= Output number
00
– Maximum number of outputs for your configuration (
0
= untie)