DXP HD 4K PLUS Series • SIS Configuration and Control
55
Command
ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
IP Control Port Commands (continued)
Date and time
Set date and time
EX3&
CT
}
Ipt
X3&]
Set the date and time.
View date and time
E
CT
}
X3*]
View the date and time.
View GMT offset
E
CZ
}
X3(]
View the GMT offset.
View available time zones
E
*TZON
}
<
Multiple
X4)
*
X4!]
>
]]
occurs at the
end of the list.
View a list of available time
zones.
Set time zone
EX4)
*TZON
}
Tzon
•X4)
*
X4!]
Set the time zone.
NOTE:
Use the
View
available
time
zones
command for available values for
X4)
.
View time zone
E
TZON
}
X4)
*
X4!]
Tzon
•X4)
*
X4!]
View the set time zone.
Verbose modes 2 and 3
Passwords
NOTES:
•
Passwords are case-sensitive.
•
The pipe (
|
) character is invalid for passwords.
•
A password cannot be a single space.
Set administrator password
EX4@
CA
}
Ipa
•X4@]
Set the administrator
password.
Clear administrator password
E•
CA
}
Ipa
•]
Reset or clear the
administrator password.
NOTES:
X3&
= Date and time
In the format
MM
/
DD
/
YY
•
HH
:
mm
:
SS
MM
= month:
01
(January) to
12
(December)
DD
= day:
01
to
31
(depending on the month)
YY
= year:
00
to
99
(last two digits)
HH
= hour:
00
to
23
mm
= minute:
00
to
59
SS
= second:
00
to
59
X3*
= Date and time (view only)
In the format
DAY
,
•
DD
•
MMM
•
YYYY
•
HH
:
mm
:
SS
DAY
=day of the week:
Mon
to
Sun
DD
= date:
01
to
31
(depending on the month)
MMM
= month:
01
to
12
YYYY
= year:
2000
to
2099
HH
= hour:
00
to
23
mm
= minute:
00
to
59
SS
= second:
00
to
59
X3(
= GMT offset
-12:00
to
+14:00
X4)
= Time zone
Time zone code (use the Read time zones command to determine the
available time zones). The code is followed by an * in the response.
X4!
= Time zone description
In the format
(UTC
X3(
)
•
<Description>
. This is the UTC equivalent for
a time zone as well as a general description of the geographical area.
X4@
= Password
0 to 128 characters
