DXP HD 4K PLUS Series • Operation
22
Saving and Recalling Presets
A preset is a complete map of all input and output connections. The current configuration
(0) can be saved as a preset in any one of 16 preset memory slots. Preset locations
are assigned to the input buttons and (where necessary) output buttons, and each
switcher has as many presets available from the front panel as it has input and output
buttons. In addition, all presets can be saved and recalled from the PCS software and
by SIS commands. When a preset is retrieved from memory, it becomes the
current
configuration
.
NOTES:
•
Presets cannot be viewed from the front panel unless recalled as the current
configuration. Presets
can
be viewed using the PCS configuration program (see the
section, beginning on page 57, for more details).
•
The current configuration and all presets are stored in non-volatile memory.
When power is removed and restored, the current configuration is still active and all
presets are retained.
•
When a preset is recalled, it replaces the current configuration, which is lost
unless it is also stored as a preset. The recalled preset overwrites all of the current
configuration ties in favor of the preset ties.
•
Inputs 1 through 4 correspond to global presets 1 through 4.
•
Outputs 1 through 4 correspond to presets 5 through 8.
•
Inputs 5 through 8 correspond to presets 9 through 12.
•
Outputs 5 through 8 correspond to presets 13 through 16.
INPUTS
1
5
2
6
3
7
4
8
OUTPUTS
1
5
2
6
3
7
4
8
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
1
2
3
4
5
6
7
8
Preset
Preset
Preset
Preset
Preset
Preset
Preset
Preset
9
10
11
12
13
14
15
16
Figure 19.
Preset Locations
NOTE:
Before attempting to save or recall a preset, ensure that the unit is
not
in
