DXP HD 4K PLUS Series • Operation
15
•
Preset button
— The
Preset
button has the following functions:
Primary:
•
Place the switcher in preset saving mode to save a configuration as a preset,
and in preset recalling mode to activate a previously-defined preset.
•
Indicate when preset saving mode is active (blinks) and when preset recalling
mode is active (lights steadily).
Secondary:
•
Select the 19200 baud rate for the Remote RS-232 port.
•
In conjunction with the
Enter
and
Esc
buttons, place the switcher in serial port
configuration mode.
•
Indicate that the Remote RS-232 port is set to 19200 baud in serial port
configuration mode (blinking).
•
Esc button
— The
Esc
button has the following functions:
Primary:
•
Cancel operations or selections in progress and resets the front panel button
indicators.
NOTE:
The
Esc
button does
not
reset the current configuration or any
presets.
•
Indicate that the escape function has been activated (blinks once).
Secondary:
•
Select the 115200 baud rate for the Remote RS-232.
•
With the
Enter
and
I/O
buttons, set the front panel lock mode.
•
With the
Enter
and
Preset
buttons, place the switcher in serial port
configuration mode.
•
Select 115200 baud for the Remote RS-232 port in serial port configuration
mode (see
Selecting the Remote RS-232 Port Baud Rate
on page 30).
•
Indicate that the Remote RS-232 port is set to 115200 baud in serial port
configuration mode.
I/O button
— For this button, selecting
Video
routes HDMI signals from any of the
inputs to any of the HDMI outputs, while selecting
Audio
routes the de-embedded
audio from any of the HDMI inputs to any of the S/PDIF and analog audio outputs.
The
I/O
button has two LEDs to its right: a green Video LED and a red Audio LED.
Press this button to toggle between video (green LED lights) and audio (the red LED
lights) for the selected input or output.
NOTE:
The I/O Video LED blinks to indicate that the unit is in power save mode.
The
I/O
button has the following functions:
Primary:
•
Select the signal type, audio or video, for the input or output.
•
Select audio or video for the configuration that is being viewed.
