DXP HD 4K Series • Operation
44
Viewing the Mute Status
To check the mute status of an output:
DXP 88 series
1.
Press the
Esc
button to clear any previous selections.
2.
Press the
I/O
button to select the type of signal to view (video or audio).
3.
Press the button for the output to be viewed.
•
If the selected output is muted, the button LED blinks red (audio) or green (video),
depending on your viewing selection in step 2.
•
If the selected output is not muted, the LED for its button lights steadily.
4.
If desired, press the
I/O
button again to view the mute status of the other signal type.
For example, after viewing the audio mute status of an output and before it times out,
press the
I/O
button again to view the video status of the same output.
5.
To exit the view mode, press
Esc
>
or wait for the indicators to time out.
DXP 1616 series
1.
Press the
Esc
button to clear any previous selections.
2.
Press the
Audio
,
Video
, or both I/O buttons to select the type of signal to view.
3.
Press and release the
View
<
button, which lights green. All output buttons that are not
tied light.
4.
Press the button for the output to be viewed.
•
If only the
audio
is muted for the selected output:
•
If the
Audio
I/O button was selected, the output button blinks
red
.
•
If the
Video
button was selected, the output button lights steadily
green
.
•
If both the
Video
and
Audio
I/O buttons were selected, the output button
blinks alternating
amber and red
.
•
If only the
video
is muted for the selected output:
•
If the
Audio
I/O button was selected, the output button lights
red
.
•
If the
Video
I/O button was selected, the output button or blinks
green
.
•
If both
Video
and
Audio
I/O buttons were selected, the output button blinks
alternating
amber and green
.
•
If neither signal is muted for the selected output, the output button lights steadily in
the color indicating its signal type.