DXP HD 4K Series • Operation
23
•
Output buttons or LEDs light or blink one of the following colors:
•
Green
— Video only ties
•
Red
— Audio only ties (outputs 1 and 2 on the DXP 88 series, outputs 1
through 4 on the DXP 1616 series)
•
Amber
— (DXP 1616 series only) Video and audio ties (outputs 1 through 4)
NOTES:
•
To indicate
potential ties
, output buttons or LEDs
blink
in the appropriate
color when an input is selected.
•
To indicate
current ties
, output buttons or LEDs
light
steadily
in the
appropriate color when an input is selected.
•
To clear unwanted outputs, press and release the associated output buttons that
are lit, or whose LEDs are lit. To indicate
potential unties
, output buttons or LEDs
blink
the appropriate color when an output is deselected (muted) but not untied
from the input.
4.
Press and release the
Enter
button to accept the tie or to break an existing tie.
5.
Repeat steps
1
through
4
to create or clear additional ties until the desired configuration
is complete.
NOTES:
•
Only one input can be tied to an output. If you tie an input to an output that is
already tied to another input, the older tie is broken in favor of the newer tie.
•
If an input with no tie is selected, only the button or LED for the selected input
lights (no output buttons or LEDs light).
•
As each input and output is selected, the associated output button or LED
blinks the appropriate color to indicate a tentative tie. Buttons or LEDs for
outputs that were already tied to the input light the appropriate color steadily.
Outputs that are already tied can be left on, along with new blinking selections,
or toggled off by pressing the associated output button.
•
DXP 1616 series only
— When the
Video
and
Audio
buttons are lit, if an
input with an audio tie but no video tie is selected, the input button lights amber
and the output button lights the appropriate color (red, green, or amber).
Creating Ties
DXP 88 series
NOTE:
Audio ties are made only with de-embedded audio.
To tie an input to an output:
1.
Press and release the
Esc
button to clear any input button, output button, or control
button indicators whose LEDs might be lit.
ENTER
PRESET
ESC
I/O
VIDEO
AUDIO
Press the
Esc
button to clear all selections.
The LED blinks once.
Figure 16.
Press the Esc button