Extron electronics DXP 1616 HD 4K, User Manual, Page: 29 / 116

DXP HD 4K Series • Operation 21
Secondary:
•
Set the front panel lock mode (executive mode).
•
View the video or audio mute status of the selected input or output.
•
Using the
Enter
button, select between front panel lock modes (lock mode 2 and
lock mode 0) (see Locking and Unlocking the Front Panel (Executive Modes)
on page 45).
•
Select between front panel lock types (lock mode 2 and lock mode 1).
•
With the
Video
and
Audio
I/O buttons, initiate system reset from the front panel
(see Resetting the System from the Front Panel on page 47).
F
Audio and Video LEDs (DXP 88 series only) — These two LEDs are located to the
right of the I/O button and light to indicate whether the selected input or output is audio
or video. The Video LED lights green when the I/O button is pressed to toggle to video.
The Audio LED lights red when audio is selected.
G
Signal LEDs (DXP 88 series only) — The DXP 88 series models have a green Signal
LED for each input. Each LED lights when a signal (TMDS clock activity) is present on
the input.
H
HDCP LEDs (DXP 88 series only) — The DXP 88 series models have a green HDCP
LED for each input, which lights if the source connected to that input is HDCP
encrypted.
Button Icons — DXP 1616 Series Only
You can temporarily remove the numbered translucent covers of the DXP 1616 and
DXP 168 input and output buttons to insert labels behind the covers.
Input and output labels can be created easily with the Extron Button Label Generator
software, which can be downloaded from
www.extron.com . Each input and output
button can be labeled with names, alphanumeric characters, or color bitmaps. See Making
Labels Using the Button Label Generator Program — DXP 1616 Series Only on
page 98 for details on using the labeling software and the procedure for removing and
replacing the translucent covers.
DVD
VCR
Computer Computer
Document
Camera
VTG
I
N
P
U
T
S
10 13 15
13 12 14 15 16
Figure 15. Example of Button Labels on a DXP 1616 Series Front Panel