DXP HD 4K Series • Operation
19
Output buttons
— The output buttons have the following functions:
Primary:
•
Select outputs.
•
Identify the selected outputs.
Secondary:
•
Save and recall presets (see
on page 37).
•
Mute video and audio output (see
Muting and Unmuting Outputs from the
Front Panel
on page 41).
•
De-embed HDMI audio signals from the input.
Control buttons
— The three Control buttons have the following functions:
•
Enter
button
— The
Enter
button has the following functions:
Primary:
•
Save changes made on the front panel.
•
Indicate that a potential tie has been created but not saved.
•
Indicate that a preset has been selected to be saved or recalled but the preset
action has not been accomplished.
Secondary:
•
Select 9600 baud rate for the Remote RS-232 port.
•
Set the front panel lock mode (executive mode).
•
With the
Preset
,
View
<
, and
Esc
>
buttons, place the switcher in serial port
configuration mode.
•
Indicate that the Remote RS-232 port is set to 9600 baud in serial port
configuration mode (blinking).
•
Preset button
— The
Preset
button has the following functions:
Primary:
•
Place the switcher in preset saving mode to save a configuration as a preset,
and in preset recalling mode to activate a previously-defined preset.
•
Indicate when preset saving mode is active (blinks) and when preset recalling
mode is active (lights steadily).
Secondary:
•
Select the 19200 baud rate for the Remote RS-232 port.
•
With the
Enter
,
View
<
, and
Esc
>
buttons, place the switcher in serial port
configuration mode.
•
Indicate that the Remote RS-232 port is set to 19200 baud in serial port
configuration mode (blinking).
•
View button
— The
View
<
button has the following functions:
Primary:
•
Place the switcher in view-only mode to display the current configuration.
NOTE:
View-only mode also provides a way to mute and unmute outputs
(see
Muting and Unmuting Outputs from the Front Panel
on
page 41).
•
Indicate that the DXP is in view-only mode.