DXP HD 4K Series • Installation
12
Connecting to the USB Config Port
The USB mini-B Config port is located on the DXP front panel. It provides an alternative
connection for configuring the switcher via SIS commands.
1.
Use a USB A to mini-B cable to connect the USB Config port to a USB port on the
computer.
NOTE:
Figure 9 shows a DXP 88 4K HD series. The front panels of the DXP 1616
and 168 have the Config port near the center, between the block of input and
output buttons and the control buttons.
USB Cable
USB A
USB Mini-B
USB 1
USB
Ports
Computer
Extron
CONFIG
INPUTS
1
5
2
6
3
7
4
8
OUTPUTS
1
5
2
6
3
7
4
8
ENTER
PRESET
ESC
I/O
VIDEO
AUDIO
INPUTS
SIGNAL
HDCP
1
2
3
4
5
6
7
8
DIGITAL CROSSPOINT MATRIX SWITCHER
DXP HD 4K SERIES
DXP 4K HD
Figure 9.
Connecting to the Front Panel USB Config Port
2.
If this is the first time you have connected a DXP HD 4K to this particular USB port on
your computer, you may need to download the USB driver for DXP.