Extron electronics DXP 1616 HD 4K, User Manual, Page: 100 / 116

DXP HD 4K Series • Internal Web Page 92
Communication Settings Panel
The
Communication Settings
panel (see figure 94 ,
3
on page 90) configures TCP/IP
settings and displays RS-232 settings. To configure the TCP/IP settings, click the
Edit
button in the
Communication Settings
panel. The
Communication Settings
dialog box
opens.
Figure 95. Communication Settings Dialog Box
NOTE:
The hostname is generated from the device name. To change it, see Device
name on the next page.
To obtain an IP address automatically:
1. Select the
Use DHCP
check box.
2. Click the
Apply
button. The dialog box closes.
To set a static IP address:
1. Ensure the
Use DHCP
check box is not selected.
2. In the
IP Address
field, enter an IP address.
3. In the
Subnet Mask
field, enter the subnet mask if required.
4.
In the
Default Gateway
field, enter the default gateway if required.
5. Click the
Apply
button. The dialog box closes.
To reset all communication settings to the default values:
Click the
Reset to Default
button. The following settings are set:
• DHCP is disabled.
• The IP address is set to 192.168.254.254.
• The subnet mask is set to 255.255.0.0.
• The default gateway is set to 0.0.0.0.
To cancel pending changes:
Click the
Cancel
button. The dialog box closes.