Extron electronics DVS 510, User Manual

Page: 55 / 128

DVS 510 Series • Operation 47
F
Image adjustment buttons — Let you make adjustments to the appearance of
the image on the screen, including color, tint, contrast, brightness, and sharpness
(
DETAIL ). For each of these controls, there are two buttons: + to increase the image
property and – to decrease it. You can also freeze the image on the screen (the FREEZE
button has no equivalent on the front panel).
To adjust the image using the remote control buttons:
1. Aim the IR 904 remote control at the front panel IR sensor.
2. While watching the display, press repeatedly or press and hold the + or – button for
the desired picture control until the desired appearance is achieved.
1 1
2 2
3 3
4 4
5 5
6 6
COLOR
CONT
DETAIL
IMAGE ADJUSTMENTS
+
-
TINT
+
-
+
-
BRIGHT
FREEZE
+
-
+
-
Figure 28. IR 904 Image Adjustment Buttons
1
COLOR buttons — Adjust the color intensity (at the lowest level, all colors are
shades of gray).
2
CONT buttons
— Increase or decrease the range of image light and dark
values (contrast).
3
DETAIL buttons — Adjust the sharpness of the image.
4
FREEZE button — Freezes the image on the screen. To unfreeze the image,
press this button again.
5
BRIGHT buttons — Set the black level of the current input.
6
TINT buttons
— Change the appearance of the colors on the screen.
G
AUDIO MUTE button — Toggles audio output muting on and off.
H
VIDEO MUTE button — Toggles video output muting (hiding) on and off.
I
AV MUTE button — Mutes and unmutes both video and audio simultaneously.