Description
The Extron DVI 104 Tx and DVI 104 Rx are fiber optic transmitter/
receiver units that extend DVI signals up to 1,640' (500 m) using four
multimode fiber optic cables.
The transmitter plugs directly into the source device
and the receiver plugs directly into the display
device.
The transmitter/receiver pair can handle DVI video
signals with resolutions up to 1920 x 1200 or 1080p
at 60 Hz.
Optional four-fiber multimode cables are available
in varying lengths.
PC with DVI Output
DVI 104
Transmitter
DVI 104
Receiver
Hi-resolution
Flat Panel Display
with DVI-D Input
4 Multi Mode
Fiber
Up to 500 m (1640')
Front panel features
a
Power input
— The transmitter and receiver
both have plugs for a 3.5 mm jack to provide
5 VDC to the unit.
The center pin of the jack c5 VDC; the
outer shell of the jack is the negative rail.
N
If the source device is able to provide 5 VDC on pin 14 of its
DVI output, the transmitter can draw power from the source
device. If the source is a laptop or a PC using a PCI-E graphics
card, it will not be able to provide enough power and the
transmitter must be powered with a separate external power
supply.
The receiver must be powered by an external power supply
through the power input plug.
1
2
68-1549-50
A
02 09
1
Setup Guide — DVI 104 Tx/Rx