DVC RGB-HD A • Remote Configuration and Control
28
6.
Click the
Connect
button (see figure 19,
1
).
DVC
RGB-HD
A
appears in green in the
Connected
Device
panel, followed by a check mark.
Figure 19.
Connection Method Menu on the Add Device Window
7.
Click the
Browse
button in the
New
Firmware
File
(Optional)
panel (
2
).
8.
In the
Open
window, navigate to the new firmware file, which has an .
S19
extension,
and double-click it.
ATTENTION:
•
Valid firmware files must have the file extension
.S19
. A file with any other
extension is not a firmware upgrade for this product and could cause the switcher
to stop functioning.
•
Les fichiers firmware valides doivent contenir l’extension fichier
.S19
. Un
fichier avec n’importe quelle autre extension n’est pas une mise à jour de
firmware pour cet appareil et l’appareil pourrait arrêter de fonctionner.
On the
Add
Device
window, the path to the new firmware file is displayed in the
Path
field.
