DVC RGB-HD A • Installation
4
Front and Rear Panel Features
The illustrations below show the connectors and indicators on the DVC RGB-HD A front and
rear panels.
CAUTION:
Remove power from the unit before making any connections.
ATTENTION :
Couper l’alimentation de l’unité avant de faire l’installation électrique.
ATTENTION:
•
Use electrostatic discharge precautions (be electrically grounded) when making
connections. Electrostatic discharge (ESD) can damage equipment, although you
may not feel, see, or hear it.
•
Prenez des précautions contre les décharges électrostatiques (soyez
électriquement relié à la terre) lorsque vous effectuez des connexions. Les
décharges électrostatiques (ESD) peuvent endommager l’équipement, même si
vous ne pouvez pas le sentir, le voir ou l’entendre.
Front Panel
DVC RGB-HD A
A
A
A
C
C
C
INPUT
B
B
B
Figure 2.
DVC RGB-HD A Front Panel
A
Power and signal status LED
— This bicolor LED lights as follows:
•
Amber
while the unit is powered by a 12 VDC external power supply
•
Green
when the DVC detects horizontal sync on the input
B
VGA input
— Connect an RGBHV input, such as a computer, to this 15-pin VGA
connector (a male-to-male, 15 pin mini VGA cable is provided for this connection). The
DVC digitizes and converts the RGB input signal to DVI or HDMI format.
C
Audio input
— Connect an analog audio input to this 3.5 mm TRS jack.
The analog audio input can be embedded onto the TMDS output. TMDS output with
embedded analog audio (HDMI RGB Full 4:4:4) is the default setting.
