DTP2 T 201 D Transmitter • Remote Configuration and Control
17
Timeout
Pauses of 10 seconds or longer between command ASCII characters result in a timeout.
The command operation is aborted with no other indication.
Symbols Used in this Guide
When programming in the field, certain characters are most conveniently represented by
their hexadecimal rather than their ASCII values. The table below shows the hexadecimal
equivalent of each ASCII character:
ASCII to Hex Conversion Table
•
Space
Figure 14.
ASCII to Hex Conversion Table
Symbol Definitions
]
= Carriage return with line feed
|
or
}
= Pipe character or carriage return (no line feed) can be used interchangeably.
• = Space character
W or
E
= W or Escape key can be used interchangeably.
X!
= Verbose mode
0
= Clear/none
1
= Verbose mode (default)
2 = Tagged responses for queries
3 = Verbose mode and tagged responses for queries
X@
= Text string of up to 24 characters
Default =
DTP2‑T‑201‑D
Alphanumeric characters and hyphens only
No distinction between upper and lower case
No spaces
First character must be a letter and the last character cannot be a hyphen
X#
= Firmware version to the second decimal place
X$
= Remote power
0
= No remote power (Off)
1
= DTP2 48 VDC (On)
14
Summary of Contents for DTP2 T 201 D
Page 2: ...Safety Instructions ...
Page 6: ......
