DTP HDMI 4K D Series Transmitter and Receiver • Installation and Operation
9
Receiver Front Panel
OUTPUTS
AUDIO
Tx Rx G Tx Rx
RS-232
IR
OVER DTP
A
B
C
Figure 8.
DTP HDMI 4K D Receiver Front Panel Connectors
A
HDMI output connector
— Connect an HDMI display for the transmitted direct digital
image.
B
Audio output connector
— Connect a stereo audio device to this 3.5 mm mini stereo
jack to receive the unbalanced audio output (see
on page 6 for wiring details).
C
RS-232 and IR (control) pass-through connector
— Connect a serial
communications port to this 3.5 mm, 5-pole captive screw connector for bidirectional
RS-232 communication (see
RS-232 and IR Connector Wiring
the connector).
NOTE:
The RS-232 connector can also transmit one-way modulated IR signals.
