DTP HDMI 4K D Series Transmitter and Receiver • Installation and Operation
8
Receiver Connections
Receiver Rear Panel
SI
G
LINK
DTP IN
POWER
12V
0.8 A MAX
B
A
Figure 7.
DTP HDMI 4K D Receiver Rear Panel Connectors
A
Receiver input ports
— Connect the opposite end of the twisted pair cable from the
transmitter output connector (see
B
on the previous page) to this RJ-45 connector
(see
Twisted Pair Recommendations for DTP Communication
on page 10 to
properly wire the
RJ-45 connectors).
ATTENTION:
•
Do not connect these outputs to a telecommunications or computer data
network.
•
Ne connectez pas ces appareils à des données informatiques ou à un réseau
de télécommunications.
B
DC power input connector
— Plug the included external 12 VDC power supply
into either this 2-pole connector (see
on page 11 to wire the
power connector) or the power input connector on the transmitter (see Figure 6,
A
on the previous page).
