7.
Press
Enter
to confirm your new values. Press it again if action confirmation is
required. The yellow highlighting is replaced by the yellow outline on the menu screen.
8.
Do any of the following:
•
Press the
t
or
button to move to another item on the submenu and repeat
steps 5 through 7.
•
Press
Menu
to exit the submenu.
•
Press
Menu
twice to exit the submenu and close the main menu.
NOTES:
•
Values in submenus that do not apply to the current input are shown as
N/A
.
•
An asterisk following an item indicates that it is the default.
•
The OSD times out and closes after 1 minute if no buttons are pressed.
Quick Setup Submenu
This submenu (see figure 12) contains a selection of menu items that are also available on
other OSD menus. It allows you to make several basic configuration adjustments to the
DSC from the same menu screen.
NOTE:
On this submenu, the DSC HD-3G A has an
Input
EDID
item, which is not on
the DSC 3G-HD A
Quick
Setup
on page 16).
Figure 12.
Quick Setup Submenu — DSC HD-3G A
DSC 3G-HD A and DSC HD-3G A • Operation
17