Extron electronics DSC 3G-HD A, User Manual

Page: 54 / 75

X3& X3&
= Overscan — DSC 3G-HD A
Applied only to SMPTE input rates (480i, 576i, 720p, 1080i, 1080p, and 2K)
0
= 0.0% — A true Auto-Image is executed on SMPTE inputs (default for SDI).
1
= 2.5% — An Auto-Image command snaps to a 2.5% table (no true Auto-Image is
performed).
2 = 5.0% — An Auto-Image command snaps to a 5.0% table (no true Auto-Image is
performed).
X3( X3(
= Aspect ratio
1
= Fill: each input rate automatically fills the entire output raster (default)
2
= Follow: each input rate is displayed with its native aspect ratio
X4) X4)
= Screen saver mode
1
= Black screen (default)
2
= Blue output with OSD text
X4@ X4@
= Video mute
0 = Off (unmute) (default)
1 = On (mute to black screen)
2
= On (mute all output sync and video)
X4$ X4$
= HDCP status (DSC 3G-HD A only)
0
= No sink device detected
2
= Sink detected
X4* X4*
= HDMI output format (DSC 3G-HD A only)
0 = Auto (default). (HDMI – RGB Full to a CEA sink or DVI to a non-CEA sink).
OSD reads
Auto
.)
1 = DVI (RGB 444, 0-255, no audio, no InfoFrames)
OSD reads
DVI RGB 444
.)
2
= HDMI RGB Full (RGB 444, 0-255, audio, InfoFrames.
OSD reads
RGB Full
.)
3
= HDMI RGB Limited (RGB 444, 16-235, audio, InfoFrames.
OSD reads
RGB Limited
.)
4
= HDMI YUV Full (YUV 444, 0-255, audio, InfoFrames.
OSD reads
YUV 444 Full
.)
5 = HDMI YUV Limited (YUV 444, 16-235, audio, InfoFrames.
OSD reads
YUV 444 Limited
.)
6 = HDMI YUV Full (YUV 422, 0-255, audio, InfoFrames.
OSD reads
YUV 422 Full
.)
7
= HDMI YUV Limited (YUV 422, 16-235, audio, InfoFrames.
OSD reads
YUV 422 Limited
.)
X5! X5!
= SDI audio channels — AES channel pair 1 or 2 of the selected group (DSC 3G-HD A only).
1
= Channel pair 1
2
= Channel pair 2
X5@ X5@
= SDI audio group — AES channel pair group 1 through 4 (DSC 3G-HD A only).
1
= Group 1
3
= Group 3
2 = Group 2 4 = Group 4
X5$ X5$
= Audio gain and attenuation
-18 through +12 dB. (For DSC 3G-HD A, this applies to analog input.)
Response is two digits with leading
+
or
–
and is padded with a zero.
X5* X5*
= Audio input type — DSC 3G-HD A
0
= None: input is muted.
1
= Analog (on 5-pole captive screw connector)
2 = Two-channel digital (2CH audio, one channel pair SDI selected) (default)
3 = Eight-channel digital (8CH audio, pairs 1 through 4 SDI. Audio delay is applied and the
signal is re-embedded in the SDI output.)
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 46