DMP 64 Plus • SIS Configuration and Control
58
Command
ASCII command
(host to device)
Response
(device to host)
Additional description
Automixer Gate Monitoring
Get current automixer
gate status
E
J
X9*
AU
}
X7$
]
Unsolicited automixer
gate status update
T
his is enabled by selecting
the Automix dialog
Monitor
Gate
checkbox in DSP
Configurator (see the
DSP
Configurator Help File for
details
).
DsV
X9*
*
X7%
*
X7(
*
X7*
]
KEY:
X7$
= Gate monitoring status:
0
= Gate monitoring disabled
1024
= Gate monitoring enabled
X7%
= Meter status:
0
= Meter off
1
= Meter on
X7*
= Meter relative to threshold:
0
= Above threshold
1
= Equal to or below threshold
X7(
= Signal level when gate is opened or closed.
0000-1023
= gate closed, ≥
1024
= gate opened.
X9*
= Target OID:
See
Signal Level Monitoring (SLM)
SLM tracks when the signal at a metered gain OID crosses a set threshold level. When SLM is enabled for an OID, an unsolicited
message is sent when the threshold level is crossed. The response includes the OID, meter on/ off status, level after the threshold was
crossed, and if the level was going up or down when the threshold was crossed.
Set SLM status
E
J
X5*
*
X7^
AU
}
DsJ
X5*
*
X7^
]
Get current threshold
status
E
J
X5*
AU
}
X7^
]
Unsolicited meter value
DsV
X5*
*
X7%
*
X7&
*
X7*
]
KEY:
X5*
= Target OID:
See
X7%
= Meter status:
1
= Meter off
2
= Meter on
X7^
= Monitoring threshold:
0
= disabled
0001
-
2000
= signal threshold to monitor (-0.1 to -200.0 dBFS).
X7&
= Meter value:
0000
-
2000
=
0.0
to
-200.0
dBFS
X7*
= Meter relative to threshold:
0
= Above threshold
1
= Equal to or below threshold
