Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
TMDS Output Format
Set TMDS output format for
a single output
E
X!
*
X1!
VTPO
}
Vtpo
X!
*
X1!]
Sets the TMDS output format (
X1!
) for
a single output (
X!
).
Set TMDS output format for
all outputs
E
X1!
VTPO
}
Vtpo
X1!]
Sets the TMDS output format (
X1!
) for
all outputs.
View TMDS output format
settings
E
VTPO
}
X1!
•
X1!
•
...
X1!]
Vtpo
X1!
•
X1!
•
...
X1!]
Response in verbose mode 2 or 3.
TMDS output format status of outputs:
1
through
2
(DA2 HD 4K PLUS)
1
through
4
(DA4 HD 4K PLUS)
1
through
6
(DA6 HD 4K PLUS).
5V Output Hot-Plug Mode
Set output hot‑plug mode
(5V)
E
M
X1%
HPLG
}
HplgM
X1%]
For (
X1%
) default is
1
.
View output hot‑plug mode
(5V) status
E
MHPLG
}
X1%]
HplgM
X1%]
Response in verbose mode 2 or 3.
HDCP Authorized Device
Enable or disable HDCP
authorization
E
E
X@
HDCP
}
HdcpE
X@]
Enables or disables HDCP
authorization (
1
= enabled (default)).
View HDCP authorization
status
E
EHDCP
}
X@]
HdcpE
X@]
Shows HDCP authorization status.
Response in verbose mode 2 or 3.
Output HDCP Mode
Set the output HDCP mode
for a single output
E
S
X!
*
X(
HDCP
}
HdcpS
X!
*
X(]
Sets the output HDCP mode (
X(
) for
output (
X!
).
Set the output HDCP mode
for all outputs
E
S
X(
HDCP
}
HdcpS
X(]
Sets the output HDCP mode (
X(
) for all
outputs.
View the output HDCP
mode for all outputs
E
SHDCP
}
X(
•
X(
•
...
X(]
HdcpS
X(
•
X(
•
...
X(]
Response in verbose mode 2 or 3.
Output HDCP status of outputs:
1
through
2
(DA2 HD 4K PLUS)
1
through
4
(DA4 HD 4K PLUS)
1
through
6
(DA6 HD 4K PLUS).
NOTES:
X!
= Output:
1
through
2
, (DA2 HD 4K PLUS);
1
through
4
, (DA4 HD 4K PLUS);
1
through
6
, (DA6 HD 4K PLUS).
X@
= Status:
0
= Disabled or undetected;
1
= Enabled or detected.
X(
= Output HDCP mode:
0
= Encrypt as required by input (continuous trials for HDMI sinks, attempt for
10 seconds on DVI sinks and then fail);
1
= Always encrypt (continuous trials for HDMI sinks, attempt for
10 seconds on DVI sinks and then fail);
2
= Encrypt as required by input (continuous trials for HDMI and
DVI sinks);
3
= Always encrypt (continuous trials for HDMI and DVI sinks).
X1!
=
TMDS output format:
0
= Auto, pass through if HDMI sink; force DVI format if DVI sink (default):
1
= DVI RGB 4:4:4;
2
= HDMI RGB 4:4:4 Full;
3
= HDMI RGB 4:4:4 Limited;
4
=
HDMI YUV 4:4:4 Full
5
=
HDMI YUV 4:4:4 Limited;
6
=
HDMI YUV 4:2:2 Full
;
7
= HDMI YUV 4:2:2 Limited.
X1#
= Input HDCP status:
0
= No video detected,
1
= Video detected with HDCP*,
2
= Video detected without HDCP*, (*Active source detection based on PLL clock or TMDS lock (not
solely based on +5VDC presence.)
X1%
=
5V output hot‑plug mode:
0
= Auto ( 5V enabled when source with 5V is present, otherwise Off).
1
= 5V always enabled (default).
DA HD 4K PLUS Series • SIS Commands
30
Summary of Contents for DA 2HD 4K PLUS
Page 6: ......
