Extron electronics CrossPoint 450 Plus 3248 HV, User Manual, Page: 159 / 186

6-21
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
Global Presets page
You can save and recall global presets from the Global presets page (figure 6-21).
Access the Global Presets page by clicking the
Global Presets
link on the left of the
Set and View Ties page.
Set and View Ties
Refresh
RGBHV & Audio Settings*
* If no audio BME is installed in your system, this link reads “Video Settings”.
Figure 6-21 — Global Presets page
Saving a preset
Save the current configuration (configuration 0) as a preset as follows:
1 . Click the Save Preset button.
2 . Select the desired preset by clicking on one of the presets listed. To create a
new preset, click one of the [unassigned] buttons. Overwrite an existing
preset by clicking an already existing preset.
3 . If desired, type over the current name in the box adjacent to the Save Preset
button.
N
Preset names are limited to up to 12 upper- and lower-case alphanumeric
characters and the {space} _ and / characters.
N The following characters are invalid in preset names:
+ ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
If you do not rename an unassigned button, the CrossPoint or MAV switcher
names the preset as Preset {the selected preset number}, “Preset 08” for
example.
If you do not rename an existing preset when it is overwritten, the
CrossPoint or MAV switcher retains the same name.
4 . Click the Accept button.