Extron electronics CrossPoint 450 Plus 2412 HV, User Manual

Page: 64 / 214

Operation, cont’d
CrossPoint / MAV Matrix Switchers • Operation
3-20
Viewing a configuration
The current configuration can be viewed using the front panel buttons. The
View-only mode prevents inadvertent changes to the current configuration.
View-only mode also provides a way to mute video and audio outputs (see “Muting
and unmuting video and/or audio outputs” on page 3-35.
View the current configuration as follows:
1 . Press the Esc button to clear any input button indications, output button
indications, or control button indications that may be on.
2 . Press and release the View button. All of the buttons light for outputs that are
not tied as follows:
• Amber : No tied video or audio input
• Green : No tied video input
• Red : No tied audio input
3 . Select video, audio, or both to view by pressing the RGBHV
(CrossPoint switchers) or Video (MAV Plus switchers) button and/or the
Audio button.
4 . Select the desired input or output(s) whose ties you wish to view by pressing
the input and output buttons.
N • When you enter View-only mode, the output buttons light for all outputs
without ties. Likewise, when you press an output button for which there are
no ties, the output buttons light for all outputs without ties.
• To see all ties of the current configuration, press and release each input and
output button, one at a time, with the RGBHV (CrossPoint switchers) or
Video (MAV Plus switchers) button and the Audio button lit.
• In View-only mode, you can view video and audio, video-only, or audio-only
ties. Pressing and releasing the RGBHV (CrossPoint switchers) or Video
(MAV Plus switchers) button and the Audio button toggles each selection on
and off.
• When you view video and audio ties, the RGBHV (CrossPoint switchers) or
Video (MAV Plus switchers) button is lit green and the Audio button is lit
red. After you select an input or output, the output buttons light different
colors to show where video and audio ties are not the same (audio is broken
away)

Amber = video and audio

Green = video only

Red
= audio only
• After 30 seconds of front panel inactivity, View-only mode automatically
deselects.