Extron electronics CrossPoint 450 Plus 2412 HV, User Manual

Page: 178 / 214

HTML Operation, cont’d
CrossPoint / MAV Matrix Switchers • HTML Operation
6-16
Change the RGB delay (CrossPoint switchers)
The RGB delay interval defines how long the screen is blanked when switching to a
new input for the selected output.
Change the RGB delay as follows:
1 . Click the Output drop box. A drop down scroll box appears (figure 6-16).
Figure 6-16 — Output selection drop box
2 . Click and drag the slider or click on the scroll up button or scroll down
button until the desired output is visible.
3 . Click the desired output.
4 . Click the RGB delay drop box. A drop down scroll box appears (figure 6-17).
Figure 6-17 — RGB delay drop box
5 . Click the desired RGB delay.