6-11
CrossPoint / MAV Matrix Switchers • HTML Operation
6
.
Click the
Firmware Upgrade
link.
7
.
Click the
Browse
button. An open file window appears.
8
.
Navigate to the folder where you saved the firmware upgrade file. Select the
file.
N
Valid firmware files must have the file extension “.S19”. Any other file
extension is
not
a firmware upgrade.
N
The original factory-installed firmware is permanently available on the
CrossPoint or MAV switcher. If the attempted firmware upload fails for any
reason, the switcher automatically reverts to the factory-installed firmware.
9
.
Click the
Open
button.
10
. Click the
Upload
button. The firmware upload to the switcher may take a few
minutes.
File Management Tab
File Management Page
To delete files such as user-supplied HTML pages from the switcher or to upload
your own files to the switcher, click the File Management tab. The switcher
downloads the file management HTML page (figure 6-9).
Figure 6-9
—
File Management page
N
The files listed in figure 6-9 are shown for example only and may not be present
on your switcher.
To delete a file, click the
Delete
button adjacent to the unwanted file.
Upload your own files as follows:
Summary of Contents for CrossPoint 450 Plus 2412 HV
