Operation, cont’d
Fiber Matrix 6400 Switcher • Operation
3-6
f
Esc button —
The Esc button has two primary functions (•) and four
secondary functions (
❏
):
• Cancel operations or selections in progress and reset the front panel
button indicators.
N
The Esc button does
not
reset the current configuration or any presets.
• Flashes once to indicate that the escape function has been activated.
❏
In the
I/O Group
mode, select group 4 and indicate its selection.
See “I/O grouping” on page 3-17.
❏
With the Enter, Preset, and View buttons, select
Serial Port Selection and
mode. See “Selecting the rear panel Remote port protocol
❏
Select 115200 baud for the RS-232/RS-422 port in
Serial Port Selection and
mode and indicate its selection. See “Selecting the rear
panel Remote port protocol and baud rate” on page 3-27.
❏
With the Enter button, toggles the front panel lock on and off.
See “Locking out the front panel (
Power indicators
g
Primary and Redundant Power Supply LEDs —
Green —
Indicates that the associated power supply is
operating within normal tolerances.
Red —
Indicates that the associated power supply is
operating outside the normal tolerances or has failed. See
chapter 7, “Maintenance and Modifications”, to replace the power supply.
Button labels
The numbered translucent covers on the input and output pushbuttons can be
removed and replaced to insert labels behind them.
Input and output labels can be created easily with Extron’s Button-Label Generator
software, which ships with every Extron matrix switcher. Each input and output
can be labeled with names, alphanumeric characters, or even color bitmaps for
easy and intuitive input and output selection (figure 3-2). See chapter 5, “Matrix
Software”, for details on using the labeling software. See chapter 7, “Maintenance
and Modifications”, for blank labels and a procedure for removing and replacing
the translucent covers.
DVD
VCR
Computer
Computer
Document
Camera
VTG 200
10
13
15
29
28
30 31 32
Figure 3-2 — Sample button labels and icons
POWER SUPPLY
PRIMARY
REDUNDANT
Summary of Contents for 6400s
