Mounting
Bracket/
Accessory
Wall Install
Ceiling Install
Protrusion
Ceiling Width(s)
Notes
#37210 Flat
metal easy-
attach adaptor;
Requires #37201
bracket for
mounting
Yes
Yes
No
15/16"
Wall mount or
flush ceiling
mount with
single width or
any solid surface.
WS-MBI-
DCFLUSH
(#37211); Bracket
No
Yes
Yes
9/16", 1.5", 15/16"
Protruded ceiling
mount with
varing widths.
Mounting to a Suspended/Drop ceiling
The AP3915e can be mounted to a suspended or drop ceiling directly using the main mounting bracket
on the t-bar. If there is a ceiling tile protrusion, add the optional T-bar adaptor to the main mounting
bracket prior to T-bar installation.
The AP can be mounted to a suspended/drop ceiling using:
1 #37201, Main Mounting Bracket to a Flat T-bar.
2 #37201, Main Mounting Bracket with adaptor KT-135628-01 to a Flat T-bar.
3 #37211, WS-MBI-DCFLUSH bracket to a Flat T-bar.
4 #30518, WS-MBI-DCMTR01.
Mounting the AP using the Main Mounting Bracket to a Flat T-bar
The AP can be mounted on a t-bar using the mian mounting bracket that is shipped with the unit.
Pre-Installation checklist:
•
T-bar width can be either 9/16” (15mm) or 15/16” (24mm).
•
T-bar bottom must be flat all the way across.
•
T-bar minimum base thickness: N/A; must be structurally sound.
•
T-bar maximum base thickness: 0.055”.
•
Ceiling Tile must be flat all the way across.
Installation Process
ExtremeWireless™ AP3915e FCC/ROW Install Guide
13
