Power over Ethernet (PoE) Application Guide
The ISW series switches support PoE function for connected powered device. The operation mode
contains 802.3af (15.4W), 802.3at (30W). Each port has five classes for selection (class 0–4). Total
power budget of the system is up to 240 watts.
For power management friendly use, it supports power scheduler for each PoE port. Each time interval
is 30 minutes from Sunday to Saturday. Customer can select which interval to set PoE on or PoE off. It
also supports PoE reset function to power off, then power on the PoE function on a port at certain time.
Maximum five time can be created in a week.
Reserved Power Determination
There are three modes for configuring how the ports/PDs may reserve power:
Class Mode
In this mode each port automatically determines how much power to reserve according to the class
the connected PD belongs to, and reserves the power accordingly. Five different port classes exist
and one for 4, 7, 15.4 or 30 Watts.
Allocated Mode
In this mode, you allocate the amount of power that each port may reserve.
The allocated/reserved power for each port/PD is specified in the Maximum Power fields.
Power over Ethernet (PoE) Application Guide
ISW Application Guides
74
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
