Example 3
In this scenario, these clients belong to multiple
s, so you have to create more one VLAN to be the
agent for all client VLANs.
1. To create a VLAN, navigate to
Configuration
>
VLANs
>
Allow Access VLANs
.
2. Set port 14 be vlan200 member port.
3. Navigate to
Configuration
>
IPMC
>
VLAN Configuration
.
4. Select the Snooping Enable check box.
5. Set VLAN ID of port14.
6. If there is no querier on the L3 switch, you have to select
Querier Election
, and set the
Querier
Address
. The IP address is in the same network as uplink interface.
ISW Application Guides
Example 3
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
69
