2. Enable Index1, and select role as
Ring(Slave)
.
3. Select two ports as Forward Ports.
4. Enable Index2, and select role as
Dual Homing
.
5. Select one port as a Primary Port, and the other as Backup Port.
Chain Configuration
Configuring Chain Member
1. Navigate to
Configuration
>
RingV2
.
2. Disable Index1 and Index2, and then enable Index3.
3. Select role as
Chain(Member)
.
4. Select two member ports for this chain member switch.
ISW Application Guides
Chain Configuration
ISW Series Managed Industrial Ethernet Switch Hardware Installation & User Guide
55
