Regulatory Information
Extreme Networks Wireless AP3825 Installation Guide
35
Other
•
IEEE 802.11a (5 GHz)
•
IEEE 802.11b/g (2.4 GHz)
•
IEEE 802.11n
•
IEEE 802.3at (PoE)
•
IEEE 802.3af (PoE)
FCC RF Radiation Exposure Statement
The Extreme Networks Wireless AP3825 complies with FCC RF radiated exposure limits set
forth for an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This device has been tested and has
demonstrated compliance when simultaneously operated in the 2.4 GHz and 5 GHz
frequency ranges. This device must not be co-located or operated in conjunction with any
other antenna or transmitter.
The radiated output power of the Extreme Networks Wireless AP3825 is below the FCC
radio frequency exposure limits as specified in “Guidelines for Human Exposure to Radio
Frequency Electromagnetic Fields” (OET Bulletin 65, Supplement C). This equipment should
be installed and operated with a minimum distance of 20 cm between the radiator and
your body or other co-located operating antennas.
WARNING
The
Extreme Networks Wireless AP3825
must be installed and used in strict
accordance with the manufacturer's instructions as described in this guide and related
documentation for the device to which the
Extreme Networks Wireless AP3825
is
connected. Any other installation or use of the product violates FCC Part 15 regulations.
This Part 15 radio device operates on a non-interference basis with other devices operating
at the same frequency when using the antennas provided or other
Extreme Networks
-
certified antennas. Any changes or modifications to the product not expressly approved by
Extreme Networks
could void the user's authority to operate this device.
For the product available in the USA market, only channels 1 to 11 can be operated.
Selection of other channels in the 2.4 GHz band is not possible.